Latest Blog

When Do Indianapolis Asphalt Sealcoating Contractors Start Their Season?

Asphalt sealcoating is one of the most important aspects of pavement maintenance, but the harsh winter conditions make it tough for contractors to provide this vital service. Fortunately, Indianapolis asphalt sealcoating contractors are ready to act once the weather warms up. But when does sealcoating season officially start?

How Do Weather Conditions Affect How Asphalt Sealcoating Contractors Work?

Asphalt sealcoating in Indianapolis helps protect your pavement from weather exposure, chemical damage and wear. Whether you have a massive parking lot or an industrial complex covered in asphalt, many damaging factors threaten your pavement’s beauty, reliability and safety. Sealcoating is a service you need every few years to maximize longevity and prevent damage.

However, the weather can throw a wrench into the works. Asphalt sealers can contain as much as 70 percent water by volume. These products are asphalt emulsion sealers that contractors must prepare by adding water and sand. Once applied to a paved surface, water slowly evaporates from the asphalt sealer, allowing the remaining elements to bond to the pavement.

Sealcoating in Indianapolis requires warm and dry conditions. Otherwise, evaporation can’t occur. Extreme cold, excessive heat and precipitation interfere with the curing process. If it’s not warm and dry, the asphalt sealer won’t cure properly, resulting in lackluster results and inferior protection.

Why Can’t Sealcoating Contractors Work in the Winter?

The biggest challenge contractors face when sealcoating in Indianapolis is cold temperatures. In this part of the country, temperatures frequently dip below freezing. On average, Indianapolis receives more than 25 inches of snow yearly.

For successful sealcoating results, the ideal temperatures are around 55 to 90 degrees with no more than 50 percent relative humidity. Also, Indianapolis asphalt sealcoating requires 24 to 48 hours to cure. So, conditions must be stable during application and as many as two days after. A few days of consistent warmth in the winter is a rarity in Indianapolis!

It’s sometimes possible for Indianapolis asphalt sealcoating contractors to provide service in the late fall and early winter. However, any reputable sealcoating company will not attempt it if conditions aren’t perfect. Therefore, experienced companies will not do asphalt sealcoating in Indianapolis until temperatures warm up.

When Do Contractors Begin Performing Indianapolis Asphalt Sealcoating Again?

No concrete dates mark the start of asphalt sealcoating in Indianapolis. Weather is unpredictable. Therefore, contractors will keep an eye on the forecast and rely on historical weather data to decide when to start offering asphalt sealcoating services. Generally, sealcoating in Indianapolis begins in the spring when temperatures are consistently above 50 to 55 degrees Fahrenheit. That’s usually around mid-March to early April. Depending on conditions, the season lasts until October.

At Black Hawk Paving, we bring 50 years of experience and knowledge to your asphalt sealcoating project. We understand the complexities involved with Indianapolis asphalt sealcoating and how weather can impact success. Our team never cuts corners or takes risks that could sacrifice the final product. We only use the highest quality materials available and work closely with you to minimize disruptions to your business. We aim to protect your pavement while providing a service you can count on. Black Hawk Paving is available for all your asphalt paving, repair and maintenance needs. We do new paving, repairs, sealcoating, crack routing and filling, ADA-compliant features, warehouse striping, grading and excavation, concrete paving and more.

Call Black Hawk Paving today at (463)225-0400, email info@blackhawkpaving.com or use our online form to get a free, no-obligation quote.

What Is The Lifecycle of An Asphalt Paving Indianapolis Parking Lot?

When engineered and laid by a seasoned contractor, the best asphalt paving Indianapolis has ever seen can provide decades of service and beauty. However, it doesn’t last forever, and it doesn’t fall apart all at once. Like any other construction material, asphalt paving undergoes many changes throughout its life. In this blog, you’ll learn about asphalt’s lifecycle and gain insight into the unique challenges it faces at different stages of its service life.

What Is the Average Life Expectancy of the Best Asphalt Paving Indianapolis Offers?

The average life span of asphalt paving in Indianapolis is around 25 years. Of course, there are no guarantees, and many factors will impact longevity. When built by experienced asphalt paving companies, you can expect new paving to serve your property well for at least two and a half decades. However, there’s a lot you can do to get many more years of use. When cared for by trusted asphalt companies, some paved surfaces in Indy can hold up well for over 30 years.

How Does Asphalt Paving in Indianapolis Change Throughout Its Life Cycle?

Your Indianapolis asphalt paving needs regular attention throughout its life to stay in great shape. However, its needs will evolve with time. Successful construction from asphalt paving companies is just the start. Here’s what you can expect moving forward.

•The First 5 Years: The first half-decade after installation, Indianapolis asphalt paving is at its strongest. The material is still resilient. Therefore, only minor issues like slight cracking may pop up. Asphalt companies should seal your pavement after it cures completely. That’s typically six months to a year after construction.
•5 to 7 Years: Asphalt paving is still durable during this stage. However, many years of exposure will cause some cracks to occur. You may also notice fading and slight discoloration as the asphalt deteriorates slightly. Getting crack-filling services and continuing with periodic sealcoating is important to avoid bigger problems.
•7 to 15 Years: At this point, asphalt begins to encounter more frequent trouble. Your asphalt paving may suffer from light damage here and there, including the occasional pothole. With timely repairs from experienced asphalt companies, you can mitigate the risk of more severe damage. Patching and minor repairs go a long way in keeping your asphalt paving in Indianapolis in good condition.
•15 to 25 Years: After the 15-year mark, it may be time to consider resurfacing. Asphalt paving in Indianapolis is more susceptible to damage at this stage. That includes more severe cracking, frequent potholes and more. Asphalt paving companies can perform resurfacing to add years of life to your pavement and prevent widespread damage.
•25 Years and On: Eventually, your asphalt will reach a point of no return. Even after resurfacing, the pavement and its foundation will suffer frequent damage. Exposure and wear may result in structural failure. Working with asphalt companies to reconstruct your pavement is typically a better choice for pavement that’s older than 25 years.

What Can I Do to Maximize the Longevity of My Asphalt Paving Indianapolis Investment?

Consistent and dedicated maintenance is key to long-lasting asphalt paving in Indianapolis. As you can see from the timeline above, your pavement will encounter fewer issues at the start of its life. However, you’ll have to invest more in repairs and maintenance as it ages.

From its first year onward, prioritize maintenance tasks like sealcoating, crack-filling and cleaning. If damage occurs, consult asphalt companies as soon as possible for repairs.

The best thing you can do for your asphalt paving in Indianapolis is get regular inspections. Working with asphalt paving companies long-term will help you stay on top of your pavement’s needs as they evolve. Contractors can assess the asphalt’s condition, recommend services you need and help you handle everything from maintenance to repairs.

Let Black Hawk Paving take care of all your Indianapolis asphalt paving needs. You can turn to us for new asphalt paving, sealcoating, repairs, crack routing and filling and more. We also do warehouse striping, ADA-compliant features, concrete paving, repairs and grading. At Black Hawk Paving, we’re committed to doing things right and helping you maintain beautiful, long-lasting asphalt paving. We have over 50 years of experience and specialize in logistically sensitive projects. Our team can service your pavement while minimizing disruptions to your business.

Call Black Hawk Paving today at (436)225-0400 for a free project quote. You can also reach the team using our online form or email us at info@blackhawkpaving.com for more information.

Maintaining asphalt’s beauty and reliability over the long haul requires periodic sealing. Asphalt sealcoating is a vital maintenance task that helps protect your pavement from the sun, rain, wear and the many other damaging factors it faces. Indianapolis asphalt sealcoating looks simple enough, but you should leave it to the professionals. Otherwise, you might encounter the following amateur sealcoating mistakes.

What Happens If You Don’t Prepare the Surface Before Asphalt Sealing?

One of the biggest mistakes an amateur can make is not cleaning and drying your pavement before applying sealer. Experienced asphalt sealcoating companies take their time to remove weeds, sweep up trash and pre-treat stains. They also know to perform necessary repairs and fill cracks before proceeding with asphalt sealing.

Failing to prepare the pavement for application will result in a weak bond. While the finished product might look good, tire turns and light traffic will quickly cause the poorly bonded sealer to peel and flake.

Will Applying Sealer in One Thick Coat Speed up Indianapolis Asphalt Sealcoating?

Asphalt sealcoating contractors apply at least two thin coats of sealer, allowing each layer to dry before proceeding with the next. Amateurs often try to save time by doing one thick coat. However, thicker layers of asphalt sealing products don’t cure properly. Instead, they become a thick, sticky, peeling mess that offers zero protection to your asphalt!

While applying thinner coats takes longer, asphalt sealcoating companies do it to ensure long-lasting protection and proper bonding.

Is Curing Necessary for Successful Asphalt Sealcoating in Indianapolis?

Asphalt sealcoating needs at least 24 hours to cure. Depending on weather conditions, it may take longer. During that time, asphalt sealcoating contractors keep the treated area blocked from traffic, ensuring no pedestrian or vehicle uses the pavement. Ignoring the curing requirements will lead to many issues. First, the sealer won’t bond to your pavement.

Secondly, pedestrians and vehicles will likely track the material as they move over the pavement, creating an unsightly finish. Asphalt sealcoating must receive ample time to cure before you open your pavement to traffic.

How Can Inclement Weather Impact Indianapolis Asphalt Sealcoating?

Sealcoating companies often don’t complete projects unless the weather conditions are just right. Asphalt sealcoating in Indianapolis requires warm, dry weather with no chance of precipitation. Exact recommendations vary from one sealer to another. However, most require ground and air temperatures to be at least 60 degrees Fahrenheit. In cooler weather, sealers will not cure.

The same applies to rainy conditions and high humidity levels. Moisture in the air can cause the sealer to cure unevenly, preventing that all-important bond to your asphalt. Reputable sealcoating companies will schedule appointments around the weather, giving your pavement the best chance at success.

Can Using Cheap, Low-Quality Asphalt Sealing Products Save Money?

Sealcoating products vary in quality. While you can find sealer at big-box stores, it’s often low-quality formulas. It can get the job done, the sealcoating finish won’t last. Furthermore, it may offer lackluster protection.

Asphalt sealcoating contractors use premium asphalt emulsions. They have a deeper color and high-quality ingredients, providing long-lasting protection. Cheaper alternatives may cause your asphalt to degrade quicker and require more frequent reapplications.

Don’t leave asphalt sealcoating in Indianapolis to amateurs. Instead, turn to experienced professionals like Black Hawk Paving. We have nearly 50 years of experience being one of the most trusted sealcoating companies in the area. We use high-quality products and have the equipment to seal surfaces of all sizes. Our team works hard to exceed your expectations and deliver customer service you can count on. In addition to being among the most skilled asphalt sealcoating companies around, we’re available for asphalt paving, repairs, concrete paving, grading and excavation, crack routing and filling and more.

Get a free quote and schedule your sealcoating appointment today by calling Black Hawk Paving at (463) 225-0400. You can also email info@blackhawkpaving.com or use our online contact form below.

Are you interested in investing in Indianapolis concrete paving? Concrete is a fantastic material that’s revolutionized modern construction. It’s popular for parking lots, sidewalks, loading docks and other reliable surfaces. A skilled concrete paving contractor can handle all the logistics from start to finish, delivering an outstanding final product that lasts. But what does the paving process entail?

Does Indianapolis Concrete Paving Require Any Site Preparations?

All projects involving concrete paving in Indianapolis begin with careful planning and site preparations. Before construction starts, contractors develop strategies to bring engineering plans to life. That includes determining the proper paving thickness, planning the placement of reinforcements, etc.

After finalizing those details, your concrete paving company can excavate your site. The excavation and grading process is different for every property. Some sites need full land clearing, while others require strategic subgrade preparations to ensure the foundation has the load-bearing capacity needed to support traffic. Most concrete flatwork also involves the construction of forms, allowing the wet mix to hold its shape while it cures. Whatever the case, contractors take extra time to get things right during this stage to prevent complications later.

What Type of Mixes Do Concrete Paving Contractors Use?

Concrete is a mix of cement, aggregates, water and additives. It seems simple, but the ratio of those core ingredients and the specific materials used can give concrete characteristics that meet engineering plans. When performing concrete paving in Indianapolis, skilled contractors choose the right mix based on your project’s needs. The standard for commercial parking lots is a mix that can achieve a strength of around 4,000 PSI after 28 days of curing.

Concrete paving companies order the appropriate mix from suppliers who prepare it offsite and transport it to your property.

Does Indianapolis Concrete Paving Require Curing?

Curing is a critical part of the paving process. After compacting the concrete to remove air pockets and finishing the surface to create the right texture, your concrete paving company will allow the material to cure for 24 to 48 hours. Concrete paving takes 28 days to fully cure. However, it’s ready to walk on after a few days and can support traffic after about a week.

Concrete paving companies will monitor the concrete as it cures, ensuring no issues arise.

How Do Concrete Paving Companies Minimize the Risk of Cracking?

A skilled paving contractor will cut joints into your pavement to prevent cracking during and after the curing process. Joints serve many purposes, and there are different types that your concrete paving company can create. Control joints give flatwork a designated path to crack, preventing uncontrollable spread. Meanwhile, expansion joints allow the material to expand and contract during seasonal temperature changes. Experienced contractors will determine what’s necessary when performing concrete paving in Indianapolis, creating joints during the pouring process or after curing.

Black Hawk Paving is ready to serve when you need a concrete paving contractor you can trust. With nearly 50 years of proven experience behind us, we have what it takes to complete projects of all sizes and scopes. We strive to deliver great results while providing reliable communication, regular project updates and full transparency. Our team will also work closely with you to complete paving projects on your terms, minimizing or preventing downtime to your business. We’re available for concrete paving, asphalt paving, repairs, crack routing and filling, ADA compliance, warehouse striping and more.

Let’s discuss your paving project in great detail. Call Black Hawk Paving at (708)554-6779 for a free quote. If you prefer, you can also email info@blackhawkpaving.com or use our online contact form below.

Asphalt paving is a major investment that can transform your commercial or industrial property. While many contractors want your business, choosing the right Indianapolis asphalt paving company isn’t a decision you should take lightly. Not all asphalt contractors have the experience to deliver great results. So, how do you know you can trust your contractor? Here are a few things to consider.

Does Your Indianapolis Asphalt Paving Company Have Proven Experience?

One of the best ways to weed out amateurs from seasoned asphalt professionals is to look at examples of past work. When consulting with asphalt contractors, request to see their work portfolio. Inquire about their experience completing projects like yours and ask to see photos. You can also request a list of references. References include previous clients you can call to learn more about what it’s like to work with the paving contractors you consider. Past clients can also tell you how the company’s asphalt paving is holding up today.

Don’t forget to ask about the company’s history. While years of experience aren’t the sole factor you should consider when hiring paving contractors, it does make a difference. For example, contractors with decades of proven experience are likelier to do a knockout job than those with only a few years in the industry.

Does The Contractor You Hire Have the Credentials to Perform Asphalt Paving in Indianapolis?

Another detail to look into is licensing. Indiana doesn’t require state-level licensing to perform asphalt repairs or paving. However, municipalities like Indianapolis must have proper licensing and meet certain Department of Business and Neighborhood Services requirements. You can easily cross-reference license information to check the legitimacy of the asphalt companies you hire.

You can also look into additional certifications or training. Insurance and bonding are important, too. Asphalt contractors invest in insurance to protect themselves and provide clients peace of mind. Contractors should have insurance before performing any asphalt repairs or new paving projects.

What Type of Reputation Does Your Chosen Indianapolis Asphalt Paving Company Have?

Asphalt is a widely used material for properties of all sizes. There’s a good chance that the asphalt companies you consider have a reputation. Do your due diligence to learn more about what past clients think of their service. Read online reviews and testimonials to get more insight into the type of asphalt paving a company does and the quality workmanship they provide.

The information you gather is non-biased, so reviews can be valuable when making hiring decisions.

How Important Is Communication When Hiring Asphalt Companies?

Before hiring a company for asphalt paving in Indianapolis, speak with representatives to discuss your project. During your consultation, you can ask all the necessary questions to gather information about the company’s experience and legitimacy. It’s also wise to ask about their approach to asphalt repair, new paving and projects similar to yours.

You don’t have to be well-versed in asphalt paving to have an informative discussion. What’s important is that companies communicate well, answer all your questions and provide full transparency. If contractors aren’t willing to give the information you need or respond to inquiries, consider it a big red flag you should avoid.

Don’t trust asphalt paving in Indianapolis to just any company. Black Hawk Paving is one of the area’s most trusted paving contractors. We’re approaching our 50th year in business and have a proven track record of success for projects big and small. We’re committed to full transparency, offering highly detailed quotes while keeping you updated throughout your project’s progress. We know how stressful construction projects can be and do all we can to make things easy from start to finish while delivering great results. We’re available for all your asphalt needs. You can also trust us for asphalt repairs, sealcoating crack routing and filling, ADA compliance, warehouse markings, grading, excavation and more.

Ready to work with a contractor you can trust? Call Black Hawk Paving today at (463)225-0400, email info@blackhawkpaving.com or use our online contact form to get in touch and receive your free quote.